The combined road car on shssi Kama-65115

Production and sale of combined road machines on the chassis KamAZ-65115 Perhaps making a finished machine or installing equipment on your chassis Service maintenance. Regular customers discounts! The combined harvesting machine is designed for cleaning improved road surfaces from fresh snow (raking, sweeping, removing from driveways) and for distributing materials and special reagents on the road surface during winter road maintenance. In summer, the machine is used for sweeping, washing and watering pavements and green spaces. The machine can also be used as an additional tool for extinguishing fires. Chassis KAMAZ-65115/53215 Wheel formula 6x4 Sand spreading equipment Bunker capacity, m3 7.0 The thickness of the sheet metal hopper 4.0 Drive equipment Hydraulic (as a conveyor drive it is possible to install the hydraulic motor RPG-6300 or a worm gearbox with a hydraulic motor) The density of the dressing, g / m2 10 ... 500 Spreading width, m 2-10 Adjusting the width and density of dressing Stepless with two manual hydraulic flow regulators mounted on the hopper Conveyor type Scraper, chain Syst. cleaning the conveyor from excess sand-salt mixture Available with a polypropylene bristle brush installed in the rear of the grit bin Watering equipment Tank capacity, m3, not less than 10.0 Width of the treated strip when washing, m To 8.5 Width of the treated strip during watering, m Up to 20.0 Water Pump Drive Hydraulic Productivity of the water pump, l / min 1000 Working pressure of water, mPa, not less than 0.8 Working body Front pipe with 2 rotary nozzles Front swivel blade Height of blade, mm 800 Blade length, mm 3000 The thickness of the sheet pen blade, mm, not less than 4.0 Thickness of plowshare, mm, at least 40 Width of processing, mm 2600 The height of the cleaned layer of fresh snow, m 0,2 Working angle, degree +/- 30 Lifting-lowering hydraulic drive Manual Rotation / Hydraulic Actuator Weight, kg 370 Working speed during snow removal, km / h 40 Brush average Drive Hydraulic Support device 2 swivel wheels Working frequency of rotation of a brush, rpm 450 Initial diameter of the brush, mm, not less than 550 The diameter of the brush shaft, mm, not more than 120 Working width, mm, not less than 2300 Angle of rotation in terms of rel. longitudinal axis of the machine, 60 degree Weight, kg 585